Copper Rivets & Burrs # 9
brought to you by Dark Victory Armory and Made in the U.S.A.
This style of rivet is a two part with rivet and burr. The rivet is inserted through the materials that you wish to connect and then the burr is forced down onto the shaft of the rivet to form an interference fit. The shaft of the rivet that extends past the burr is then peened with a hammer (ball-peen) to mushroom it out thus locking the burr in place. All our rivets are shipped with the corresponding # of burrs included but you can buy more here if you'd like.
One pound of 3/8" length #9 FH copper leather rivets contain about 195 sets
One pound of 1/2" length #9 FH copper leather rivets contains about 147 sets. (hand count)
One pound of 5/8" length #9 FH copper leather rivets contains about 137 sets.
One pound of 3/4" length #9 FH copper leather rivets contains about 120 sets.
One pound of 7/8" length #9 FH copper leather rivets contains about 100 sets.
One pound of 1" length #9 FH copper leather rivets contains about 81 sets.
One pound of 1 1/4" length #9 FH copper leather rivets contains about 75 sets.
One pound of 1 1/2" length #9 FH copper leather rivets contains about 70 sets.
We now offer #9 3/4" and ROUND HEAD copper rivet and burrs! about 86 sets/lb.
** Shaft Length note on the Round Head #9 - 3/4" is the actual shaft length not including head. ** Using the diagram below "E" - "B" = 3/4".
*Quantities are based upon industry standards. We don't hand count each box, however we do guarantee that the overall weight delivered is as promised.
AMAZING BULK DISCOUNT!
Even though our prices are already the best anywhere...
If you buy 5 lbs of rivets we can and will include a FREE 6th LB!
Just tell us what size you'd like. Mix and match is fine, just be sure it's listed as in stock and if you are ordering different sizes just send along a message to say what size you'd like for your FREE pound.
Since these are made from solid copper they will not rust and are superior heavy duty fasteners useful for:
- leathercraft
- bike seats
- tack and harness construction and repair
- vintage wood boat repair and joinery
- saddlery
- medieval armor building such as the SCA/MSR/WMA.
The specifics on sizing for #9 Flat Head rivets are
A = .468" for the head diameter (.456 - .48)
B = .058" for the head height
C = .161" for the body diameter (.157 - .165)
D = .145" for the point diameter (.141 - .149)
E = the stated length in the dropdown menu
Burrs diameter are the same size as the head.
One Pound boxes and Hand Counted rivets include the corresponding # or burrs.
These quality fasteners are made in the USA.
We encourage you to compare our quality and features against the competition. Quite frankly we are offended by their price gouging.
Dark Victory Armory uses superior hardware, finish, and leather while still offering the lower price.